Ford Transit Vans

Auxiliary HVAC & VAC

High performance aftermarket heating and cooling systems engineered for vehicle specific platforms that minimize install time and maximize reliability.

9.0---11.9-kW__gallery__3.jpg

Standard Tie-in HVAC

LONDON

The London is a low profile, rear heating and cooling unit that packages into the driver's overhead compartment designed to deliver conditioned air rearward into the cargo space. The placement of the London offers convenience as well as minimal refrigerant, coolant and condensate drain plumbing and wire harness routing.

SpecificationsLondon
ColorBlack
Cooling Capacity32,500 BTU/h (9.5 kW)
Heating Performance44,500 BTU/h (13.0 kW)
RefrigerantR134A
Nominal Voltage12V
Max. Power Consumption @ 12V21A
Max. Air Flow Evaporator Blower471 cfm (800 m3/h)
Dimensions L x W x H

21.7 x 15.7 x 7.1 in (550 x 400 x 180 mm)

Weight 

17lbs. (7.7 kg)

 

Transi_Tie_In_Thumbnail.jpg

Vehicle Integration

Cooling

The London HVAC is tied into the Ford Transit OEM front HVAC for cooling and utilizes the vehicle's existing in-line condenser and compressor.

Heating

Heating is achieved by plumbing the London's hot water heater core to the vehice's engine coolant loop. Hot water flow is controlled by Webasto hot water valve and auxiliary pump

Mercedes_Controller_01.jpg

Control Unit

Controller with on/off switch, variable fan speed and variable temperature control is standard. The controller is packaged in overhead console, or can be located anywhere inside the vehicle.

Capri_Product_01.jpg

Extreme Climate Stand Alone HVAC

For applications that require maximum cooling capacity, the Extreme Climate Stand Alone HVAC shares the same components as the Standard Tie-in Rear HVAC system (London), with the addition of an auxiliary engine driven compressor and a roof mounted, low-profile condenser (Valencia) and optional under chassis HTC condenser.

 

Transit_Extreme_Climate_Thumbnail.jpg

Vehicle Integration

Cooling

The London HVAC is tied into the Ram ProMaster OEM front HVAC for cooling and utilizes the vehicle's existing in-line condenser and compressor. ProMasters have optional factory rear A/C prep kits that allow or easy integration with the factory front HVAC.

Heating

Heating is achieved by plumbing the London's hot water heater core to the vehice's engine coolant loop. Hot water flow is controlled by Webasto hot water valve and auxiliary pump.