Mercedes Sprinter

Auxiliary HVAC

High performance aftermarket heating and cooling systems engineered for vehicle specific platforms that minimize install time and maximize reliability.

9.0---11.9-kW__gallery__3.jpg

Standard Tie-in HVAC

LONDON

The London is a low profile, rear heating and cooling unit that packages into the driver's overhead compartment designed to deliver conditioned air rearward into the cargo space. The placement of the London offers convenience as well as minimal refrigerant, coolant and condensate drain plumbing and wire harness routing.

 

SpecificationsOakland
ColorBlack
Cooling Capacity32,500 BTU/h
RefrigerantR134A
Nominal Voltage12V
Max. Power Consumption @ 12V21A
Max. Air Flow Evaporator Blower471 cfm (800 m3/h)
Dimensions L x W x H

21.7 x 15.7 x 7.1 in (550 x 400 x 180 mm)

Weight 

17lbs. (7.7 kg)

 

Merecedes_Standard_Tie_In_Thumbnail.jpg

Vehicle Integration

Cooling

The London HVAC is tied into the Mercedes Sprinter OEM front HVAC for cooling and utilizes the vehicle's existing in-line condenser and compressor.

Heating

Heating is achieved by plumbing the London's hot water heater core to the vehice's engine coolant loop. Hot water flow is controlled by Webasto hot water valve and auxiliary pump.

Mercedes_Controller.jpg

Control Unit

Controller with on/off switch, variable fan speed and variable temperature control is standard. The controller is packaged overhead console, or can be located anywhere inside the vehicle.

Kiev_Thumbnail.jpg

Extreme Climate Stand Alone HVAC

Kiev

For applications that require maximum cooling capacity, the Extreme Climate Stand Alone HVAC has rear headliner mounted higher capacity Kiev, auxiliary engine driven compressor and a roof mounted, low-profile condenser (Valencia) and optional under chassis HTC condenser.

SpecificationsKiev
Color

Black

Performance

46,000  BTU/h (13.4 kW)

Nominal Voltage

12V

Max. Power Consumption @ 12V

18 A

Dimensions L x W x H

33.7 x 14 x 7 in

Weight

27.6 lbs. (12.5 kg)

 

Mercedes_Extreme_Climate_Thumbnail.jpg

Vehicle Integration

Cooling

Kiev rear HVAC is integrated with independent refrigerant loop consisting of auxiliary compressor, roof mounted Valencia condenser or under chassis HTC condenser.

Heating

Heating integration an function is identical to Standard Tie-in Rear HVAC.

Downloads